wiki.embeddedcc.com
Temp Setpoint Adjust - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Temp_Setpoint_Adjust
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. This page is used to fine tune temperature setpoints of running processes (current state). If there is not a running Process currently controlling an output, that Setpoint is not listed. In this case, use the Edit Processes. Page to adjust the Setpoint. Back to User Interface. This page has been accessed 8,589 times.
wiki.embeddedcc.com
Programming - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Programming
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. The best place to start with BCS programming is Manual Mode. Manual Mode gives a straightforward input method to control the outputs. But first, visit System Settings. To give Outputs and Temp Inputs identifiable names. Direct - Directly force and output ON or OFF. Entering into Manual Mode will disable all active pr...
wiki.embeddedcc.com
Calibrate Temperature Probes - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Calibrate_Temperature_Probes
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. HowTo is on the forum. Will be moved here. http:/ forum.embeddedcc.com/viewtopic.php? Retrieved from " http:/ wiki.embeddedcc.com/index.php? This page was last modified on 20 December 2011, at 08:34. This page has been accessed 8,728 times. About ECC Learning Center.
wiki.embeddedcc.com
System Examples - ECC Learning Center
http://wiki.embeddedcc.com/index.php/System_Examples
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. System Examples with Flow Charts and Config Files. This Examples shows how to utilize the temperature setpoint scheduling and ramping of the BCS. Refrigeration temperature control process. Example - Fly Sparge. Example - Ignition Control. Example - Dual Stage. Links to Existing Customer BCS Blogs, Sites. This page wa...
wiki.embeddedcc.com
Main Control - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Main_Control
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. Clicking the Process buttons will start or stop the process. Each of the eight processes can run simultaneously. See State Machine Concepts. For the definition of a process. Processes can be renamed by the user in the Edit Processes. This button will cancel the alarm if the Alarm on State Change. The Output Display B...
wiki.embeddedcc.com
Communications Settings - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Communications_Settings
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. The controller must be reset in order for Ethernet Settings to take affect. Settings on this page are not saved in configuration. Static IP Address - Address applied to the controller when DHCP is disabled or timed out. Port - The port for HTTP requests. Statistics and logging of Ethernet activity.
wiki.embeddedcc.com
System Settings - ECC Learning Center
http://wiki.embeddedcc.com/index.php/System_Settings
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. System Inputs and Outputs. PID and Hysteresis Output Control Settings. Authentication and Password Change. System Reset / Reset to Defaults. System Inputs and Outputs. Update the names of the temperature probes. Temp inputs must be enabled to cause exit conditions. See Calibrate Temperature Probes. Hysteresis - The r...
wiki.embeddedcc.com
Updating Firmware - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Updating_Firmware
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. When the firmware is updated ALL settings are lost including the any IP address settings. Save configuration files, they can be reloaded (see note below). Passwords are not stored in configuration files, so they will revert back to default after an update. Firmware Images and Errata. Navigate to the Systems Settings ...
wiki.embeddedcc.com
Advanced Interface Customization - ECC Learning Center
http://wiki.embeddedcc.com/index.php/Advanced_Interface_Customization
This wiki documentation applies to version 3.7.1 and below of the BCS firmware. Starting with version 4.0 the User Guide is available at http:/ docs.embeddedcc.com. From ECC Learning Center. Pulls in an external javascript file for advanced interface customization. This file can be used to change the interface look and feel, add widgets, etc. Custom javascript is pulled in every UI page, which makes customization possibilities endless. Http:/ www.embeddedcc.com/hmi/external.js. About ECC Learning Center.