minisail9000.wordpress.com
Building a wooden Minisail | and more silly dingy stuff … since the building is doneand more silly dingy stuff ... since the building is done
http://minisail9000.wordpress.com/
and more silly dingy stuff ... since the building is done
http://minisail9000.wordpress.com/
TODAY'S RATING
>1,000,000
Date Range
HIGHEST TRAFFIC ON
Thursday
LOAD TIME
2.4 seconds
16x16
32x32
PAGES IN
THIS WEBSITE
9
SSL
EXTERNAL LINKS
16
SITE IP
192.0.78.12
LOAD TIME
2.359 sec
SCORE
6.2
Building a wooden Minisail | and more silly dingy stuff … since the building is done | minisail9000.wordpress.com Reviews
https://minisail9000.wordpress.com
and more silly dingy stuff ... since the building is done
minisail9000.wordpress.com
Cleaning Monaco 949 | Building a wooden Minisail
https://minisail9000.wordpress.com/2015/05/31/cleaning-monaco-949
Building a wooden Minisail. And more silly dingy stuff … since the building is done. Skip to primary content. May 31, 2015. Monaco 949 is the boat I acquired from Tom at Keyhaven (where you might have read the mastfoot of the blue 2427 Monaco gave way). Thank you Tom for bringing the hull on Sunday morning at Keyhaven, and many thanks to you David for taking care of the damaged hull after we left. Damaged hull in Keyhaven. Closer inspection in the workshop revealed some issues that needed taken care of.
Monaco 949 first sail (in Ostend) | Building a wooden Minisail
https://minisail9000.wordpress.com/2015/06/03/monaco-949-first-sail-in-ostend
Building a wooden Minisail. And more silly dingy stuff … since the building is done. Skip to primary content. Monaco 949 first sail (in Ostend). June 3, 2015. It sails like a dream and doesn’t take any water. So far so good. Ah yes, pardon the tiny sail, I took the wrong one along. But it went fine anyway. This entry was posted in Minisail general. Create a free website or blog at WordPress.com.
Gopro is watching | Building a wooden Minisail
https://minisail9000.wordpress.com/2015/06/28/gopro-is-watching
Building a wooden Minisail. And more silly dingy stuff … since the building is done. Skip to primary content. June 28, 2015. One of the better pictures taken at the Ostend meeting came from Dean’s Gopro. I nicked the lovely shot from Saturday afternoon with the four of us racing from FB. This Sunday, just prior to the Minisail Nationals 2015, Dean and me did some MR sailing for a change. This entry was posted in meetings/racing. Blog at WordPress.com.
Making a Sliding Seat (part III) | Building a wooden Minisail
https://minisail9000.wordpress.com/2015/04/12/making-a-sliding-seat-part-iii
Building a wooden Minisail. And more silly dingy stuff … since the building is done. Skip to primary content. Making a Sliding Seat (part III). April 12, 2015. Went over to the club and took the original seat (white) to the workshop. Surprise, the white is only 1220 mm long (roughly the width of our hulls) unlike the 1500 mm one I carry on the Sprite. The white extends to 1450 mm as it’s longer brother but -being shorter- allows the plank to slide 280mm further off center down it’s tray.
Making a Sliding Seat (part IV) | Building a wooden Minisail
https://minisail9000.wordpress.com/2015/05/09/making-a-sliding-seat-part-iv
Building a wooden Minisail. And more silly dingy stuff … since the building is done. Skip to primary content. Making a Sliding Seat (part IV). May 9, 2015. Some pictures from the finished seat. The tray bottom and the seat top have a second 4mm ply glued on: all (but a few) screws are now obscured. The unit is fixed to the hull with a ratchet strap. Notice the green hull? It’s hull 949. Had to leave hull 2427 behind at Keyhaven, 949 is the “new” kid on the block! This entry was posted in Minisail general.
TOTAL PAGES IN THIS WEBSITE
9
Catching up. | Building a Farr 3.7
https://farr37build.wordpress.com/2015/05/09/catching-up
Building a Farr 3.7. Back at it →. May 9, 2015 · 11:03 pm. I have been tardy. Not with the boat work but with writing. In contrast to the impression this blog gives, we have made some progress over the past weeks. All the frames are now doubled up where needed. The transom was still a bit more work, as doublers for the side decks needed to be shaped and mounted as well. First glueing steps for transom doubler. Back at it →. Leave a Reply Cancel reply. Enter your comment here. Address never made public).
Finishing the frames | Building a Farr 3.7
https://farr37build.wordpress.com/2015/08/06/finishing-the-frames
Building a Farr 3.7. Getting back to it. →. August 6, 2015 · 4:20 pm. It seemed that we were close to having the frames finished once all the doublers were added. As it turns out, that was a very naïve idea. The sealing and coating of the frames took more time than we had anticipated. We had both underestimated how rough plywood after the first epoxy coat is and the amount of sanding that is needed to smooth this out at least a bit. But first things first:. A few small things at the end:. Finally, I can&...
Back at it. | Building a Farr 3.7
https://farr37build.wordpress.com/2015/04/13/back-at-it
Building a Farr 3.7. Procrastinating … kind of. First but small error. →. April 13, 2015 · 5:47 pm. Oh my, it really has been a while. We’ve been doing some small things here and there but last weekend finally got down to put some time into the build again. D did a great job on the scroll saw and I finished off the lower edge of the doubler with the spokeshave. The upper edge will be faired once it is glued to the frame. The boat mascot is closely observing the progress…. Procrastinating … kind of. Looks...
Minisail Yearbook 1976 | The MiniSail Class Association
http://minisail.org.uk/htdocs/minisailYearbook.php
The MiniSail Class Association. Skip to primary content. Buying & Selling. For Sale & Wanted. Fitting a Topper rudder. History of the MiniSail. Minisail.org.uk Forum. Forum options and rules. About the registration procedure. This is an HTML version of the 1976 MiniSail Yearbook. As yet it’s incomplete, but hopefully, I’ll manage to get more done bit by bit. The idea is that this should be instantly visible – and searchable! How to buy a MiniSail. Types of Minisails in existence. Rigging and deck layout.
Resources | Building a Farr 3.7
https://farr37build.wordpress.com/resources
Building a Farr 3.7. When we initially had the idea of building a dinghy we realized that there would be quite a bit of things to learn. While each of us had a bit of experience in different skills that would come in handy, we were missing several of the basics. Of course “learning by doing” is what this project is all about, so that was just fine. Below I list the major resources we used. I cannot recommend The Gougeon Brothers on Boat Construction. Foils, rig, etc. Are my personal heros on this front!
Parts list | Building a Farr 3.7
https://farr37build.wordpress.com/parts-list
Building a Farr 3.7. This list is currently not fully up to date. Before using this as a starting point, please contact me, I am happy to provide a list of the bits missing. Update coming! Wood (missing material for frame doublers ATM! We are getting our wood from Robbins Timber and having two of the plywood sheets cut (CNC routing) by 4th Dimension. Both are in Bristol and work together, which makes our life easy. 6 sheets: 2500 x 1220 x 4 mm Robbins Elite Marine Plywood. 2 side bulkhead stringers.
Getting back to it. | Building a Farr 3.7
https://farr37build.wordpress.com/2016/09/18/getting-back-to-it
Building a Farr 3.7. September 18, 2016 · 6:01 pm. Getting back to it. The past year has brought many distractions from the Farr building. Once it was clear that we would be moving out of London (yay! We finished the girder, but stopped the build at that point, so that the project could be comfortably moved. Now, our boat kit has been relocated and the new ‘workshop’ (still a garage, but with water and power this time) is being set up. There is a ton of material out there to help. I did not follow an...
About | Building a Farr 3.7
https://farr37build.wordpress.com/about
Building a Farr 3.7. We (Daniela and Chris) are building a small sail boat. In this blog we write about our progress, discoveries on the way, and the (certain to occur) mishaps. Why build a dinghy? Why a Farr 3.7. We have a double hander. So a single hander seemed to make sense. It needs to be a boat suited for first time builders and it has to be a boat that is fun to sail. We also looked at the Streaker and the Haldron, but in the end the Farr seemed to be the ideal first project. 2 responses to “.
Back at it | Building a Farr 3.7
https://farr37build.wordpress.com/2015/08/06/back-at-it-2
Building a Farr 3.7. Finishing the frames →. August 6, 2015 · 3:55 pm. Finishing the frames →. Leave a Reply Cancel reply. Enter your comment here. Fill in your details below or click an icon to log in:. Address never made public). You are commenting using your WordPress.com account. ( Log Out. You are commenting using your Twitter account. ( Log Out. You are commenting using your Facebook account. ( Log Out. You are commenting using your Google account. ( Log Out. Notify me of new comments via email.
Foils | Building a Farr 3.7
https://farr37build.wordpress.com/foils
Building a Farr 3.7. The Farr 3.7 Class Rules. Have the following to say on foils:. 8220;9a. Rudder and centreboard may be of any shape or constructions, provided that the centreboard does not exceed 1370mm in length (measured along the board in any direction, including all fixed handles, etc.)”. Notice that there’s nothing about rudder dimensions? My starting point was the 3.7 Class Association website which contains a very useful article on center board design. A text book from 1949! While it is geared...
TOTAL LINKS TO THIS WEBSITE
16
Úvod | MiniSail.cz - svět malých velkých plachetnic
Úterý 10. duben 2018. Fuehlinger See po devíti letech. BMW X5 po Šenekelovsku. Fuehlinger See po devíti letech. Když jsme se před devíti lety, na podzim vydali na cestu do toho jiného Kolína než Jardova, vše kolem minisailu v Čechách bylo hodně nové, čekaly nás vyjížďky na Slovensko do. 1703 2018 Z akcí. BMW X5 po Šenekelovsku. 3001 2018 Mimo téma. Deset let stránek a Pf 2018. 2812 2017 Krátké zprávy. 0912 2017 Velké lodě. Počasí venku začíná přát „ručním prac&iac...Lodí v registru: 3. Jinolice, jaro 2015.
Home
Aktualisiert am: 3.04.2018. Herzlich willkommen bei der Interessen-Gemeinschaft mini-sail. Auf der Intermodell in Dortmund. Wir sind ein Freundeskreis von Modellbauern, die möglichst vorbildähnliche Segelschiffsmodelle bauen und diese auf dem Wasser ferngesteuert so gut wie möglich segeln. Unsere Mitglieder werden über diese Hompage und durch Rundschreiben mit Terminen und Berichten informiert. Die Interessen-Gemeinschaft mini-sail wird durch einen Arbeitskreis geleitet.
Home: Minisail CA
The Minisail Class Association. Welcome to the MiniSail Class Association website! The Minisail is an Ian Proctor. Design, Ian being a British boat designer who had his own company which produced spars. Quite a number of boats still have Proctor masts and booms. The Minisail appeared in the 1960s, although the Minisail story. Starts in 1959, it seems. It appeared in several versions. So don't be surprised if you have, or know of, a MiniSail which looks a little different from others.
Untitled Document
Onze website zeilde weg naar. Onze dank voor het bezoek aan deze pagina. mark de boven. Genoemde site in uw favorieten als de site voor:.
I.G.minisail1987
Der Anfang der I.G minisail. Radolfzell 28.05-31.05.92. Modelle der I.G. Zu Gast beim SMC-Wesel 2004. 1 Treffen Bernsteinsee 2005. Warendorf 0.6.06.2013. Fühlingen 06.06.2015. Letztes mal Sinsheim 12-15.03.2009. Neue Messe Stuttgart 2008. Neue Messe Stuttgart 2009. Zu Gast bei der minisail NL 2009. Zu Gast bei der minisail NL 2010. Jade Weser Cup Bilder. Herzlich Willkommen auf der HP der I.G. mini-sail. Update:29.07.2015 Treffen2015.
Building a wooden Minisail | and more silly dingy stuff … since the building is done
Building a wooden Minisail. And more silly dingy stuff … since the building is done. Skip to primary content. Skip to secondary content. June 28, 2015. This gallery contains 3 photos. One of the better pictures taken at the Ostend meeting came from Dean’s Gopro. I nicked the lovely shot from Saturday afternoon with the four of us racing from FB. This Sunday, just prior to the Minisail Nationals 2015, Dean … Continue reading →. Minisails in Ostend 20-21 June 2015. June 22, 2015. June 3, 2015. May 31, 2015.
minisailamsterdam.com staat geparkeerd bij Domeinbalie.nl
U bezoekt www.minisailamsterdam.com. Deze domeinnaam staat veilig geparkeerd bij Domeinbalie.nl. Bij Domeinbalie.nl registreert u uw domeinnaam al vanaf 12,95 per jaar (excl. BTW), inclusief vele extra’s. Actief op het internet, 100% controle via ons hosting-panel en uw website wordt gehost op razendsnelle servers. Op Nederlandse bodem. Kies één van onze 5 pakketten. Geen domeinnaam of webhosting? Bent u benieuwd naar wat Domeinbalie.nl voor u kan betekenen? Waarom een domeinnaam registreren?
minisailamsterdam.org staat geparkeerd bij Domeinbalie.nl
U bezoekt www.minisailamsterdam.org. Deze domeinnaam staat veilig geparkeerd bij Domeinbalie.nl. Bij Domeinbalie.nl registreert u uw domeinnaam al vanaf 12,95 per jaar (excl. BTW), inclusief vele extra’s. Actief op het internet, 100% controle via ons hosting-panel en uw website wordt gehost op razendsnelle servers. Op Nederlandse bodem. Kies één van onze 5 pakketten. Geen domeinnaam of webhosting? Bent u benieuwd naar wat Domeinbalie.nl voor u kan betekenen? Waarom een domeinnaam registreren?
Minisail News
Monday, 13 October 2014. Looks good in the fog, anyway. So, do the reds match? This is the biggest change to the boat - no idea if it will work yet. Rather than the plates to and bottom, I have fitted a Super Snark (look it up! Plastic gudgeon thing, which happens to be the same pin hole size. Pictures tell it most easily. Neede to put spacers in as the tiller hit the deck. Will alter the stock one day. Got there in the end, though:. I was then able to refit the kicker pretty much as before, and then ad ...
Blogue de minisailors2404 - Mini Sailors - Skyrock.com
Mot de passe :. J'ai oublié mon mot de passe. Mise à jour :. Abonne-toi à mon blog! N'oublie pas que les propos injurieux, racistes, etc. sont interdits par les conditions générales d'utilisation de Skyrock et que tu peux être identifié par ton adresse internet (54.145.69.42) si quelqu'un porte plainte. Ou poster avec :. Retape dans le champ ci-dessous la suite de chiffres et de lettres qui apparaissent dans le cadre ci-contre. Posté le vendredi 05 mars 2010 13:32. Ajouter cette vidéo à mon blogue. Rêves...
