f32thriller.blogspot.com
F32R(s;-) Thriller: July 2015
http://f32thriller.blogspot.com/2015_07_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Sunday, July 26, 2015. Laminated the bunk top panel on. I started with preparing the front so that I could laminated some flanges on the foam strips. I prepared some other foam strips for the last panels in the front. In the afternoon I started in the front with laminating working my way to the back with the bunk top panel as last yob. The foam step-up panel we made yesterdayis also in the picture. Saturday, July 25, 2015. Friday, July 24, 2015. Today w...
f32thriller.blogspot.com
F32R(s;-) Thriller: June 2015
http://f32thriller.blogspot.com/2015_06_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Saturday, June 27, 2015. The mast base will be constructed at Stailess products. And they put it in the computer so it can later be cut. Wednesday, June 24, 2015. Laminated the other bunk. For the water ballast, if some one have ideas. Nico has some nice ideas but there are still some questions. After the shopping I laminated the foam flanges for the floor panel. The back and the sides have still to be done. Tuesday, June 23, 2015. Monday, June 22, 2015.
f32thriller.blogspot.com
F32R(s;-) Thriller: making some panels again
http://f32thriller.blogspot.com/2015/08/making-some-panels-again.html
Blog of making a Farrier F32R on steroids ;-) #122. Wednesday, August 12, 2015. Making some panels again. I took some hours free to shop for some carbon and to laminated some panels. This time the panels are for the step up to the front and the vertical panel under the u corner bunk. The other big panel is 3 mm triplex what will be cut in strips for holding the access plates in the bunks. On the end I had some epoxy left so I did tape the seams in the front. Subscribe to: Post Comments (Atom). During the...
f32thriller.blogspot.com
F32R(s;-) Thriller: October 2014
http://f32thriller.blogspot.com/2014_10_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Sunday, October 26, 2014. Thrill Seeker going to the winter storage. Yesterday we hauled Thrill Seeker out of the water to bring her to the winter storage, she is still for sale, see website. Friday, October 24, 2014. Extra layer on the bottom. Today we laid a extra layer of carbon on the bottom (this is by design). Tomorrow we take Thrill Seeker out of the water to bring him to the winter storage. Sunday, October 19, 2014. Taped the entrance bulkhead.
f32thriller.blogspot.com
F32R(s;-) Thriller: September 2014
http://f32thriller.blogspot.com/2014_09_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Tuesday, September 30, 2014. Taped the stern and glued the bunk bulkheads togetter. Yesterday I took some hours free from work to tape the stern bulkheads together and tonight I glued the bunk bulkheads together. Sunday, September 28, 2014. Stern bulkheads glued togetter. Friday, September 26, 2014. Wednesday, September 17, 2014. Fixed the daggerboard case in place. Next thing to do is to glue the two halfs together. Sunday, September 7, 2014. I unpacke...
f32thriller.blogspot.com
F32R(s;-) Thriller: August 2015
http://f32thriller.blogspot.com/2015_08_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Sunday, August 30, 2015. Laminating the backrest and coaming panels. Yesterday I glued the flanges under the bunks and then we went to look at the finish of the 24 hour race. Friday, August 28, 2015. Slow but steady progress. Sunday, August 23, 2015. Stick it al together. Saturday, August 22, 2015. Sunday, August 16, 2015. Making some more bunk panels. Saturday, August 15, 2015. Glued the access holes inner flances. Friday, August 14, 2015. Today I star...
f32thriller.blogspot.com
F32R(s;-) Thriller: laminated the bunk top panel on
http://f32thriller.blogspot.com/2015/07/laminated-bunk-top-panel-on.html
Blog of making a Farrier F32R on steroids ;-) #122. Sunday, July 26, 2015. Laminated the bunk top panel on. I started with preparing the front so that I could laminated some flanges on the foam strips. I prepared some other foam strips for the last panels in the front. In the afternoon I started in the front with laminating working my way to the back with the bunk top panel as last yob. The foam step-up panel we made yesterdayis also in the picture. Subscribe to: Post Comments (Atom). What are we building.
f32thriller.blogspot.com
F32R(s;-) Thriller: glued in some foam strips and made some panels
http://f32thriller.blogspot.com/2015/07/glued-in-some-foam-strips-and-made-some.html
Blog of making a Farrier F32R on steroids ;-) #122. Saturday, July 25, 2015. Glued in some foam strips and made some panels. Subscribe to: Post Comments (Atom). What are we building. F32R aft cockpit version with aft galley and build in carbon and some 32SR features like foils and daggerboard. The enterance to the head area wil be in the back. We want to give the F32 a more modern look like this with strait bows. View my complete profile. Thrill Seeker is for sale asking price €69.000. New F- boat forum.
f32thriller.blogspot.com
F32R(s;-) Thriller: January 2015
http://f32thriller.blogspot.com/2015_01_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Saturday, January 31, 2015. Extra layers carbon on the front beam bulkhead. Sunday, January 25, 2015. A long productive day. Saturday, January 24, 2015. Fit the lower folding strut bracket mold in place. Friday, January 23, 2015. Glued the front beam mounts in place. Sunday, January 18, 2015. Tapped the cockpit floor. We tapped the topside of the cockpit floor, the underside still have to be done, maybe next week. Saturday, January 17, 2015. I started t...
f32thriller.blogspot.com
F32R(s;-) Thriller: February 2015
http://f32thriller.blogspot.com/2015_02_01_archive.html
Blog of making a Farrier F32R on steroids ;-) #122. Saturday, February 28, 2015. I de-mold the outside molds, and the result was very nice, there were still some little errors on the edges. I filled them with some putty after I did cut away the excess putty of yesterday. I also glued the beam compression bars but I forgot to take pictures of it, so I place them tomorrow. Friday, February 27, 2015. Finished the holes from the inside. Thursday, February 26, 2015. Wednesday, February 25, 2015. I started tod...
SOCIAL ENGAGEMENT