capolight.wordpress.com
Drawing gears in Sketchup. | Capolight Electronics Projects.
https://capolight.wordpress.com/2011/01/22/drawing-gears-in-sketchup
A collection of Reprap, LED and RC projects. 2011 – The year of the 3D printer? Cryogenic Granular Grinding →. Drawing gears in Sketchup. January 22, 2011. For a copy of the plugin please see this link. As the original owner appears to have moved the site. This version has been updated to work with the newer versions of sketchup. If you have trouble with this copy on older sketchup versions then try the original file which can be found here. The following is a guide for designing gears in sketchup. The n...
frankenbot.nl
FrankenBot RepRapped parts » Frankenbot
http://frankenbot.nl/frankenbot-parts
A bot made from parts of bots. This is the list of RepRap Mendel parts needed to build the Frankenbot, excluding a Adrian’s extruder, wich is provided all by Camiel for now. Some parts have a name behind it, this means they supplied the part, or pledged to do so. Some names are available more than once, they are the replacement parts used now, to be replaced by your part! Bed-spring 4off.A – René Bohne. FabLab RWTH Aachen) – CidVillas. Bed-spring 4off.B – CidVillas. Bed-spring 4off.C – CidVillas. Y-motor...
capolight.wordpress.com
Capolight Electronics Projects. | A collection of Reprap, LED and RC projects | Page 2
https://capolight.wordpress.com/page/2
A collection of Reprap, LED and RC projects. Newer posts →. DIY Dual H-Bridge to control a Pen Plotter. April 16, 2012. In my previous post I pulled apart an old pen plotter revealing it to be controlled by two brushed DC motors. In order to power each DC motor a H-bridge. Was required but I had none on hand. However it turns out a H bridge can be constructed from a few transistors as can be seen in this useful guide. In the video you can see the two 5kOhm potentiometers. When connected to the ADC on...
capolight.wordpress.com
Richard | Capolight Electronics Projects.
https://capolight.wordpress.com/author/capoau
A collection of Reprap, LED and RC projects. I am a PhD candidate in Materials Engineering located in Melbourne, Australia. Modifying Marlin Firmware to work with a TandemB. March 22, 2015. In previous posts I built a prototype ‘TandemB’ which can be thought of as a 2D Delta printer in terms of its x and y-axis movement. This prototype could be moved about under its own power but that had no compatible firmware … Continue reading →. Construction of a TandemB Prototype. March 8, 2015. February 21, 2015.
journey-to-engineer.blogspot.com
Journey to Becoming an Engineer: June 2010
http://journey-to-engineer.blogspot.com/2010_06_01_archive.html
Journey to Becoming an Engineer. Some of my art avalible @ RedBubble. Approching the End of Another Quarter. Check out my about.me profile! Nicholas C. Lewis. Everett, WA, United States. View my complete profile. Tuesday, June 15, 2010. I get a break this week before summer quarter starts. I chose to take classes over the summer so that next year will not be so heavy (only 362 more days to graduation! I have been enjoying tinkering with my new printer over at RepRap Breeding. Friday, June 4, 2010.
metrixcreate.wikidot.com
Workshops - Metrix Create:Space
http://metrixcreate.wikidot.com/workshops
Play with the wiki. Help edit this wiki. Add a new page. Http:/ www.example.com. Call (206-357-9406) or swing by the shop to sign up. Payment is required to secure your spot. Our workshops fill up quickly, so please REGISTER IN ADVANCE. To see the schedule of upcoming workshops, please look at our calendar. Here is a catalog of current and past workshops. Please check the calendar. To see our current offerings. This workshop will go over soldering through hole components. We’ll give you an electronic...
wiki.metrixcreatespace.com
Workshops - Metrix Create:Space
http://wiki.metrixcreatespace.com/workshops
Play with the wiki. Help edit this wiki. Add a new page. Http:/ www.example.com. Call (206-357-9406) or swing by the shop to sign up. Payment is required to secure your spot. Our workshops fill up quickly, so please REGISTER IN ADVANCE. To see the schedule of upcoming workshops, please look at our calendar. Here is a catalog of current and past workshops. Please check the calendar. To see our current offerings. This workshop will go over soldering through hole components. We’ll give you an electronic...
capolight.wordpress.com
Working in Tandem – Unconventional XY-axis layouts for 3D printing, laser cutting, CNC milling, engraving or pick and place. | Capolight Electronics Projects.
https://capolight.wordpress.com/2015/02/21/working-in-tandem
A collection of Reprap, LED and RC projects. Bootstrapping a pen plotter to make a 3d printer. Construction of a TandemB Prototype →. Working in Tandem – Unconventional XY-axis layouts for 3D printing, laser cutting, CNC milling, engraving or pick and place. February 21, 2015. Note: If anyone is aware of what the correct names are for these types of designs then please let me know by leaving a comment. But can also be thought of as one third of a Stewart platform. The build area (the area swept by the el...
capolight.wordpress.com
Current Projects | Capolight Electronics Projects.
https://capolight.wordpress.com/current-projetcs
A collection of Reprap, LED and RC projects. This is a short list of current projects. Due to work commitments I am currently taking a break from all projects. November 26, 2012 at 1:59 pm. January 12, 2013 at 8:32 pm. Hi there, would you have any interest in a Houston Instrument HiPlot DMP-29 Plotter? Wishing to get rid of one for $50 or less – do you know where i could find some interest for it? Drop me a line – im in melbourne. March 14, 2013 at 3:46 pm. September 21, 2014 at 3:21 pm. Has since taken ...
